Polladhavan

2010-12-29T21:57:00.003-08:00

If ur ATM card is lost, pls call 1800-112211/080-26599990 immediately to block ur card any day, any time...

2010-12-29T21:57:00.001-08:00

If u lose ur mobile can report to: cop@vsnl.net or
044-23452316. They trace ur mobile location even ur mobile is switched off..

2010-12-29T21:56:00.002-08:00

To pay electricity bill no need to go EB offfice...just login www.tneb.in pay through net banking or debit card.

2010-12-29T21:56:00.001-08:00

Use of ATM card: When a thief forces u 2 take money frm d atm, dont argue r resist, u might nt knw wat he might do u. Instead punch ur pin no in reverse, i.e. If ur pin is 1254, u punch 4521. D moment u punch in d reverse, the money ll be stuck into d machine half way out and it ll alert the police without d notice of d thief. Every atm has this facility. Not every1 is aware of this...

2010-12-29T21:55:00.000-08:00

Dont scratch the recharge cards using fingertips, the scrached particles of that seals goes into your body cause CANCER, science have proved it, so always use a coin for scratching....

2010-12-29T21:54:00.000-08:00

please dont use mobile camera near transformer power lines, as the magnetic flux lines produced in the camera causes electric shocks leading to death..Avoid it..

2010-12-29T21:51:00.000-08:00

If you find any important documents like driving licence,ration card,passport,bank passbook,etc, that was missed by someone, simply put them into any near postbox. They will automatically reach the owner and fine will be collected from them.pass this to all your friends this may help someone...

How to recharage mobile in Jungle

2008-09-07T00:53:00.000-07:00

Step by Step guide to charge your mobile battery using peepal leaf
1- Open your mobile cover
2- Take out your battery
3- Take two to three fresh leaves of peepal/pipal/ashwattha tree
4- Touch the stub of these leaves on your mobile battery terminal for a
minute
5- Clean the mobile battery terminal with the soft cloth
6- Put your battery again in your mobile and switch it on
7- Now you can see the result
8- If required repeat the process with fresh leaves

This is scientifically proved in an American University

Different Way To Shutdown Ur PC

2008-08-21T08:12:00.000-07:00

There are so many different ways to turn off your Windows XP computer, let's look at some of them: 1. The standard approach - click the Start Button with your mouse, then select the Turn Off menu and finally click the Turn Off icon on the Turn Off computer dialog. blink.gif 2. Press Ctrl+Esc key or the Win key and press u two times - the fastest approach. 3. Get the Shutdown utility from Download.com - it add the shut down shortcuts for you. Else create them yourself using approach . 4. Create a shutdown shortcut on your desktop. Right click on the desktop, choose New Shortcut and type shutdown -s -t 00 in the area where you are asked to specify the location of the program file. Now you can just double click this icon to turn off the computer. The best location would be your quick launch bar. 5. Press the Win key + R key to open the run window. Type shutdown -s -t 00. [s means shutdown while t means the duration after which you want to initiate the shutdown process]. If some open processes or application won't let you turn off, append a -f switch to force a shut down by closing all active processes. 6. Win+M to minimize all windows and then Alt+F4 to bring the Turn Off computer dialog. 7. Open Windows Task manager (by right clicking the Windows Task bar or Alt+Ctrl+Del) and choose Shut down from the menu. Useful when the Windows are not responding. 8. open task manager--->click on shutdown--->hold the ctrl key and click on Turn off::::::: pc will be turned off in 3 secs.. fastest method other than hard shutdown

Recieve Orkut Scraps on your mobile

2008-07-31T09:51:00.000-07:00

Orkut Scraps Via sms

This will be one of the things all Indians would have thought in their dreams. Every one would be in eager to check their scraps to Know whether he/she has scraped me. Here is an end to that!!!
Follow the steps carefully to get scraps on you mobile for Free

1. Login to your orkut account and click on your profile itself.You will get see something like this in your browser address bar

http://www.orkut.com/Profile.aspx?uid= 10961323513766675899
In the place of 10961323513766675899 will be displayed your ID no. Make a note of this Number.

2. Now go to
http://www.mytoday.com/
and register your mobile. This can be done by sending sms REG to 9845398453. This will cost you 2 to 3 Rupees based on the operator.

3. Now Mytoday will send you your password to your mobile.

4. Login to you Mytoday account using
Username: mobile no
Password: you got in sms

5. Click on the Manage FeedsNow you would see like this
Manage Feeds
Folders:
* Default
* Email
* SMS

6. Click on SMS Now You will find an option toAdd FeedName:
URL:

7. Replace your orkut id in this url
http://www.orkutfeeds.com/feed.php?uid=10961323513766675899

8.Add this url in the feed and name as scrap

Enjoy !!!!!

Free Missed Call Alert in Airtel

2008-07-30T21:46:00.000-07:00

Just Dial *62*+919894035100# or go to Call Diverts and select when out of reach and input +919894035100.This Trick is only for airtel users.Tested in Tamilnadu.May work in other circles too...Try it out..

Leave ur comment here................

How to read deleted messages in mobile

2008-07-30T05:11:00.003-07:00

A SMS once deleted can’t be read again….but sometimes we hurrily delete some important SMS
Here is the technique that must be followed to retrieve deleted SMS
Required utility:
1) Any system explorer or file explorer program (eg. fileman or fexplorer.provided with the package)
Step 1) Open Fexplorer
Step 2) Select drive C: or D: depending on the memory in which the Sms messages have been saved.
Step 3) For example u selected c: , Then open “system” folder.
step 4) Then in “system” folder open “mail” folder.
step 5) Then in this folder u will see different folders (eg 0010001_s) and certain files (eg 00100000). These files are the actual messages. Browse through every folder and open all files till u get the sms u are looking for.
Step 6) For opening the files don’t choose options>file>open as it will show format not supported rather choose options>file>hex/text viewer. By selecting the “Hex/ text viewer” u ll be able to open and read the deleted SMS message.

CAPSLOCK,NUMLOCK,SCROLL LOCK TRICK

2008-07-30T05:10:00.001-07:00

if u manually want to edit states of ur CAPSLOCK,NUMLOCK,SCROLL LOCKyou just need to edit the registry. Start Regedit Go to HKEY_CURRENT_USER \ Control Panel \ KeyboardOpen InitialKeyboardIndicators Change the value to one of the following number
0 - All Keys off
1 - Caps Lock on
2 - Num Lock on
4 - Scroll Lock on
For multiple keys, add their values:
3 - Caps Lock and Num Lock on
5 - Caps Lock and Scroll Lock on
6 - Num Lock and Scroll Lock on
7 - Caps Lock, Num Lock, and Scroll Lock on
Log off and back on again

INSTANT PROPERTIES !!!...

2008-07-30T05:09:00.000-07:00

hi frnds Here is a quick little trick to see properties of something
If you need to get the properties for something (like my computer,any file,any folder), just hold down your ALT key and double-click it.
Try it with "My Computer" or one of your regular desktop icons.(see it really works)
I know that you can also right-click an item and select Properties from the resulting menu.but this one is really faster.....

Add a photo to my computer properties

2008-07-30T05:06:00.001-07:00

To do this:
1. Open Notepad.
2. Type the following:
[General]
Manufacturer= "your_name
[Support Information]
Line1= http://www.tricks-cafe.co.cc
Line2= visit http://trickscafe.blogspot.com for more info

3. Save as "oeminfo.ini" in the System32 folder.(Without Quote)

4. Create a bmp file(Your Photo) and save it the System32 folder as "oemlogo.bmp"(Without Quote).
The size of the image should be within 180 (wide) x120 (high) pixels

5. Now Check your My Computer Properties.

It's tested and working

TRICK TO ADD UR FAVOURITE WEBSITE IN START MENU

2008-07-30T05:03:00.000-07:00

this is a simple trick to add ur favourite web site link in START MENU
Right click on the Start button and select Explore
After Windows Explorer opens, in the right window pane, right click and select New / Shortcut
In the "Type the location of the item" enter the Web Site URL you want to create. FOR EXAMPLE http://trickscafe.blogspot.com
Click Next
In the "Type a name for this shortcut:" enter a name for the link that you want to display in the Start menu. eg : PC TRICKS
Click Finish
Now click on the Start menu and you will see the new link you just created. Click on it and it will open THAT website

PLZ LEAVE UR COMMENTS....

Forgotten Admin or User's Password

2008-07-29T22:31:00.000-07:00

Forgotten Admin or User's Password

You do not need to reinstall if you forgot the admin password.

There is a boot disk you can download at:
http://home.eunet.no/~pnordahl/ntpasswd/

that will let you reset the password of any account on NT4, Windows2000 or XP.

Just follow all the default settings which are for the admin account. Used it many
times with great success.

They also have a bootable CD image you can download.....All d best....

Increasing Graphics Performance

2008-07-29T22:28:00.000-07:00

Increasing Graphics Performance

By default, WindowsXP turns on a lot of shadows, fades, slides etc to menu items.

Most simply slow down their display.

To turn these off selectively:

Right click on the My Computer icon
Select Properties
Click on the Advanced tab
Under Performance, click on the Settings button
To turn them all of, select Adjust for best performance
My preference is to leave them all off except for Show shadows under mouse pointer and Show window contents while dragging

2008-07-29T22:23:00.001-07:00

10 reasons why PCs crash U must Know

Fatal error: the system has become unstable or is busy," it says. "Enter to return to Windows or press Control-Alt-Delete to restart your computer. If you do this you will lose any unsaved information in all open applications."

You have just been struck by the Blue Screen of Death. Anyone who uses Mcft Windows will be familiar with this. What can you do? More importantly, how can you prevent it happening?

1 Hardware conflict

The number one reason why Windows crashes is hardware conflict. Each hardware device communicates to other devices through an interrupt request channel (IRQ). These are supposed to be unique for each device.

For example, a printer usually connects internally on IRQ 7. The keyboard usually uses IRQ 1 and the floppy disk drive IRQ 6. Each device will try to hog a single IRQ for itself.

If there are a lot of devices, or if they are not installed properly, two of them may end up sharing the same IRQ number. When the user tries to use both devices at the same time, a crash can happen. The way to check if your computer has a hardware conflict is through the following route:

* Start-Settings-Control Panel-System-Device Manager.

Often if a device has a problem a yellow '!' appears next to its description in the Device Manager. Highlight Computer (in the Device Manager) and press Properties to see the IRQ numbers used by your computer. If the IRQ number appears twice, two devices may be using it.

Sometimes a device might share an IRQ with something described as 'IRQ holder for PCI steering'. This can be ignored. The best way to fix this problem is to remove the problem device and reinstall it.

Sometimes you may have to find more recent drivers on the internet to make the device function properly. A good resource is www.driverguide.com. If the device is a soundcard, or a modem, it can often be fixed by moving it to a different slot on the motherboard (be careful about opening your computer, as you may void the warranty).

When working inside a computer you should switch it off, unplug the mains lead and touch an unpainted metal surface to discharge any static electricity.

To be fair to Mcft, the problem with IRQ numbers is not of its making. It is a legacy problem going back to the first PC designs using the IBM 8086 chip. Initially there were only eight IRQs. Today there are 16 IRQs in a PC. It is easy to run out of them. There are plans to increase the number of IRQs in future designs.

2 Bad Ram

Ram (random-access memory) problems might bring on the blue screen of death with a message saying Fatal Exception Error. A fatal error indicates a serious hardware problem. Sometimes it may mean a part is damaged and will need replacing.

But a fatal error caused by Ram might be caused by a mismatch of chips. For example, mixing 70-nanosecond (70ns) Ram with 60ns Ram will usually force the computer to run all the Ram at the slower speed. This will often crash the machine if the Ram is overworked.

One way around this problem is to enter the BIOS settings and increase the wait state of the Ram. This can make it more stable. Another way to troubleshoot a suspected Ram problem is to rearrange the Ram chips on the motherboard, or take some of them out. Then try to repeat the circumstances that caused the crash. When handling Ram try not to touch the gold connections, as they can be easily damaged.

Parity error messages also refer to Ram. Modern Ram chips are either parity (ECC) or non parity (non-ECC). It is best not to mix the two types, as this can be a cause of trouble.

EMM386 error messages refer to memory problems but may not be connected to bad Ram. This may be due to free memory problems often linked to old Dos-based programmes.

3 BIOS settings

Every motherboard is supplied with a range of chipset settings that are decided in the factory. A common way to access these settings is to press the F2 or delete button during the first few seconds of a boot-up.

Once inside the BIOS, great care should be taken. It is a good idea to write down on a piece of paper all the settings that appear on the screen. That way, if you change something and the computer becomes more unstable, you will know what settings to revert to.

A common BIOS error concerns the CAS latency. This refers to the Ram. Older EDO (extended data out) Ram has a CAS latency of 3. Newer SDRam has a CAS latency of 2. Setting the wrong figure can cause the Ram to lock up and freeze the computer's display.

Mcft Windows is better at allocating IRQ numbers than any BIOS. If possible set the IRQ numbers to Auto in the BIOS. This will allow Windows to allocate the IRQ numbers (make sure the BIOS setting for Plug and Play OS is switched to 'yes' to allow Windows to do this.).

4 Hard disk drives

After a few weeks, the information on a hard disk drive starts to become piecemeal or fragmented. It is a good idea to defragment the hard disk every week or so, to prevent the disk from causing a screen freeze. Go to

* Start-Programs-Accessories-System Tools-Disk Defragmenter

This will start the procedure. You will be unable to write data to the hard drive (to save it) while the disk is defragmenting, so it is a good idea to schedule the procedure for a period of inactivity using the Task Scheduler.

The Task Scheduler should be one of the small icons on the bottom right of the Windows opening page (the desktop).

Some lockups and screen freezes caused by hard disk problems can be solved by reducing the read-ahead optimisation. This can be adjusted by going to

* Start-Settings-Control Panel-System Icon-Performance-File System-Hard Disk.

Hard disks will slow down and crash if they are too full. Do some housekeeping on your hard drive every few months and free some space on it. Open the Windows folder on the C drive and find the Temporary Internet Files folder. Deleting the contents (not the folder) can free a lot of space.

Empty the Recycle Bin every week to free more space. Hard disk drives should be scanned every week for errors or bad sectors. Go to

* Start-Programs-Accessories-System Tools-ScanDisk

Otherwise assign the Task Scheduler to perform this operation at night when the computer is not in use.

5 Fatal OE exceptions and VXD errors

Fatal OE exception errors and VXD errors are often caused by video card problems.

These can often be resolved easily by reducing the resolution of the video display. Go to

* Start-Settings-Control Panel-Display-Settings

Here you should slide the screen area bar to the left. Take a look at the colour settings on the left of that window. For most desktops, high colour 16-bit depth is adequate.

If the screen freezes or you experience system lockups it might be due to the video card. Make sure it does not have a hardware conflict. Go to

* Start-Settings-Control Panel-System-Device Manager

Here, select the + beside Display Adapter. A line of text describing your video card should appear. Select it (make it blue) and press properties. Then select Resources and select each line in the window. Look for a message that says No Conflicts.

If you have video card hardware conflict, you will see it here. Be careful at this point and make a note of everything you do in case you make things worse.

The way to resolve a hardware conflict is to uncheck the Use Automatic Settings box and hit the Change Settings button. You are searching for a setting that will display a No Conflicts message.

Another useful way to resolve video problems is to go to

* Start-Settings-Control Panel-System-Performance-Graphics

Here you should move the Hardware Acceleration slider to the left. As ever, the most common cause of problems relating to graphics cards is old or faulty drivers (a driver is a small piece of software used by a computer to communicate with a device).

Look up your video card's manufacturer on the internet and search for the most recent drivers for it.

6 Viruses

Often the first sign of a virus infection is instability. Some viruses erase the boot sector of a hard drive, making it impossible to start. This is why it is a good idea to create a Windows start-up disk. Go to

* Start-Settings-Control Panel-Add/Remove Programs

Here, look for the Start Up Disk tab. Virus protection requires constant vigilance.

A virus scanner requires a list of virus signatures in order to be able to identify viruses. These signatures are stored in a DAT file. DAT files should be updated weekly from the website of your antivirus software manufacturer.

An excellent antivirus programme is McAfee VirusScan by Network Associates ( www.nai.com). Another is Norton AntiVirus 2000, made by Symantec ( www.symantec.com).

7 Printers

The action of sending a document to print creates a bigger file, often called a postscript file.

Printers have only a small amount of memory, called a buffer. This can be easily overloaded. Printing a document also uses a considerable amount of CPU power. This will also slow down the computer's performance.

If the printer is trying to print unusual characters, these might not be recognised, and can crash the computer. Sometimes printers will not recover from a crash because of confusion in the buffer. A good way to clear the buffer is to unplug the printer for ten seconds. Booting up from a powerless state, also called a cold boot, will restore the printer's default settings and you may be able to carry on.

8 Software

A common cause of computer crash is faulty or badly-installed software. Often the problem can be cured by uninstalling the software and then reinstalling it. Use Norton Uninstall or Uninstall Shield to remove an application from your system properly. This will also remove references to the programme in the System Registry and leaves the way clear for a completely fresh copy.

The System Registry can be corrupted by old references to obsolete software that you thought was uninstalled. Use Reg Cleaner by Jouni Vuorio to clean up the System Registry and remove obsolete entries. It works on Windows 95, Windows 98, Windows 98 SE (Second Edition), Windows Millennium Edition (ME), NT4 and Windows 2000.

Read the instructions and use it carefully so you don't do permanent damage to the Registry. If the Registry is damaged you will have to reinstall your operating system. Reg Cleaner can be obtained from www.jv16.org

Often a Windows problem can be resolved by entering Safe Mode. This can be done during start-up. When you see the message "Starting Windows" press F4. This should take you into Safe Mode.

Safe Mode loads a minimum of drivers. It allows you to find and fix problems that prevent Windows from loading properly.

Sometimes installing Windows is difficult because of unsuitable BIOS settings. If you keep getting SUWIN error messages (Windows setup) during the Windows installation, then try entering the BIOS and disabling the CPU internal cache. Try to disable the Level 2 (L2) cache if that doesn't work.

Remember to restore all the BIOS settings back to their former settings following installation.

9 Overheating

Central processing units (CPUs) are usually equipped with fans to keep them cool. If the fan fails or if the CPU gets old it may start to overheat and generate a particular kind of error called a kernel error. This is a common problem in chips that have been overclocked to operate at higher speeds than they are supposed to.

One remedy is to get a bigger better fan and install it on top of the CPU. Specialist cooling fans/heatsinks are available from www.computernerd.com or www.coolit.com

CPU problems can often be fixed by disabling the CPU internal cache in the BIOS. This will make the machine run more slowly, but it should also be more stable.

10 Power supply problems

With all the new construction going on around the country the steady supply of electricity has become disrupted. A power surge or spike can crash a computer as easily as a power cut.

If this has become a nuisance for you then consider buying a uninterrupted power supply (UPS). This will give you a clean power supply when there is electricity, and it will give you a few minutes to perform a controlled shutdown in case of a power cut.

It is a good investment if your data are critical, because a power cut will cause

Recover deleted files

2008-07-29T22:18:00.000-07:00

Have you ever accidentally deleted important files from your hard disk permanently ?Most people think that the file is gone and it cannot be recovered. But that is not true. You need not worry.

Recover My Files 3.98 is a file recovery software that can:Recover deleted files even if emptied from the Recycle Bin.

Recover formatted hard drives, even if you have reinstalled Windows!!!

Recover your files after a hard disk crash.

Get back files after a partitioning error.

Recover deleted documents, photos, videos, music and emails.

Recover from hard drive, camera card, USB, Zip, floppy disk or other media.

This software is really worth giving a try. It can also recover files that are deleted due to virus,spyware or Trojan infection. Data from formatted drives can also be effectively recovered.

Recover My Files is fast and easy. No technical or data recovery software skill is required. All data recovery is done at the action of a mouse click. It has a very simple and user friendly interface.

links to download: [content suppressed]
http://www.phazeddl.com/search.php?q=Recover+My+Files

u may also use tools like undelete etc.

Access banned websites

2008-07-29T22:14:00.001-07:00

1.)the most used way is use proxies.the mostly used proxies are::
www.vtunnel.com
www.vmathpie.com
www.enlishtunnel.com
www.kproxy.com(i prefer it)
www.orkuch.com(contains both cgi & php proxies)

2.)this is also another method :-

cmd is Command Prompt.....Start-->Run-->cmd-->Press ENTER

There type tracert google.com [whichever site u want to access without "www" ]
after 30 to 40 sec finally it gives an ip address of google

Type that ip address in ur browser....

3.)To Access blocked sites: Use Calculator!!
When both Domain Name & IP Address are banned, Use Calculator to Access that Website

This unique Mathematics based trick will probably work when websites are blocked in your institution or corporate network based on the host name or their IP address.
The trick is to convert the human readable website address that's blocked (like Link:) into an IP address (208.75.184. 160) and again translate this value to a decimal address which is probably not blocked by the website filters.
Here's a step by step guide to render Link:. com to a decimal address:

How to Access Restricted Websites
1) get its IP address (216.178.39. 74), by pinging the name (if you have a direct internet connection) or if you only have access via a web proxy then find it out by using a networking website like network-tools. com.
2) start your PC's calculator, and change it to scientific mode (using the "View" menu)

3) enter each of the four IP octets, one by one, converting them to binary (enter number and click on the "Bin" radio button)
Thus 216.178.39.74 becomes
216 = 11011000
178 = 10110010
39 = 00100111
74 = 01001010
Notice how any binary numbers less than 8 digits long have had leading zeroes added to pad them out. Reassembled into IP address order, you get 11011000.10110010. 00100111. 01001010
4) Remove the dots, so you get one huge line of binary, thus: 1101100010110010001 0011101001010
5) Copy this binary string
6) Go to your scientific calculator, and hit the "Bin" button FIRST (as you are about to enter binary), THEN paste in the binary string.
7) Click on the "Dec" button on your calculator, and you will get the converted value of 3635554122
8) Add the hypertext protocol prefix and paste into your browser's address bar: Link:
Wuntoo adds: I used to be in a place that had websense, where both website names and their corresponding IP addresses were blocked. However was able to get limited access by converting the IP address to decimal, which websense (at the time) did not know about. This might have changed since, or if your school runs an old version it might still work. Note that if you surf away from the page you might hit websense blocks again unless you manually reconstruct the next address you want to get to.

How to block a site

2008-07-29T22:12:00.000-07:00

Steps

1] Browse C:\WINDOWS\system32\drivers\etc
2] Find the file named "HOSTS"
3] Open it in notepad
4] Under "127.0.0.1 localhost" Add 127.0.0.2 www.orkut.com , and that site will no longer be accessable.
5] Done!

example :

127.0.0.1 localhost
127.0.0.2 www.orkut.com

- www.orkut.com is now unaccessable

For every site after that you want to add, just add "1" to the last number in the internal ip (127.0.0.2) and then the addy like before.

IE:
127.0.0.3 www.yahoo.com
127.0.0.4 www.msn.com
127.0.0.5 www.google.com

u can use this trick for websites it works for websites but i m not sure tat it will work for proxy.....nywayz u can try.....

Fix Corrupted files in XP

2008-07-29T22:08:00.001-07:00

* Place the xp cd in your cd/dvd drive

* Go to start

* run (Open Run window)

* type in ' sfc /scannow ' (without the ')

Choose ur dress colour on feb14th.....

2008-07-29T05:47:00.000-07:00

*Red-love failure.,

*Green-waiting for love.,

*Yellow-already in love.,

*White-not interested in love.,

*Sky blue-wants second lover.,

*Black-only wants the girls for kadalai.,

choose the color of dress from the list and wear according to ur wish
and get a partner or life long friend or ur souls sharing person in ur life
and live the life full of joy happy valentines day....

Speed UP RAM using NOTEPAD

2008-07-28T22:04:00.000-07:00

Clean your RAM by notepad!!!
Clean RAM & Make Your Comp Speed Better...All credit goes to sid for sharing this trick with us.....

You may recognize that ur system gets slower and slower when playing and working a lot with ur pc. That's cause ur RAM is full of remaining progress pieces u do not need any more.

So create a new text file on ur desktop and call it .. "RAMcleaner" or something...

1. Open NotePad
2. write FreeMem=Space(64000000)
3. Save it with RAMcleaner.vbs (You may choose the "All Files" option when u save it).
4. Just press double click the file and you done it.

Note: Don't wait for any perticular program. By double clicking you found a flash on your screen and that's it. And you feel that your speed is incerased....

Creating simple virus

2008-07-28T21:48:00.000-07:00

HERE'S A WAY I FOUND TO DELETE THE MY DOCUMENTS FOLDER OF UR ENEMY OR JUST 4 FUN.HERE'S WHAT U SHOULD DO.

IF U GIVE THIS TO SOMEONE AND IF HE RUNS THIS PROGRAM THEN HIS MY DOCUMENT FOLDER WILL BE DELETED.

copy this code and paste in notepad and save with a extension .bat
rmdir C:\Documents and Settings \S\Q

ex-: virusash.bat

A Trick To Check Ur Antivirus Is Working Properly

2008-07-28T21:46:00.000-07:00

Copy this code in the text file....

"X5O!P%@AP[4\PZX54(P^)7CC)7}$EICAR-STAND

ARD-ANTIVIRUS-TEST-FILE!$H+H*"

without qutoes....

then save it with the name fakevirus.exe

If this file got deleted immediately ....that means ur antivirus is working n updated

It will not harm ur computer.

Reduce Boot Up Time

2008-07-28T21:23:00.001-07:00

Create a batch file by doing the following:

1) Open notepad and enter the following lines:

RD /S /q "C:\Documents and Settings\"UserName without quotes"\Local Settings\History"
RD /S /q "C:\Documents and Settings\Default User\Local Settings\History"
RD /S /q "D:\Temp\" <--"Deletes temp folder, type in the location of your temp folder" 2) Save the file and then name is something like deltemp.bat 3) Now click Start, Run and type in gpedit.msc --->Computer Configuration --->Windows Settings --->Scripts and double click on Shutdown --->Click Add and find the batch file you created and press ok to set the script

12 signs you LOVE someone

2008-07-28T21:00:00.000-07:00

TWELVE:
When you're on the phone with them late at night and they hang up, you still miss them even when it was just two minutes ago.

ELEVEN:
You walk really slow when you're with them.

TEN:
You feel shy whenever they're around.

NINE:
You smile when you hear their voice.

EIGHT:
When you look at them, you can't see the other people around you, you just see him/her.

SIX:
They're all you think about.

FIVE:
You realize you're always smiling when you're looking at them.

FOUR:
You would do anything for them, just to see them.

THREE:
While reading this, there was one person on your mind this whole time.

TWO:
You were so busy thinking about that person, you didn't notice number seven was missing

ONE:
You just scrolled up to check & are now silently laughing at yourself

Crash A computer

2008-07-28T20:59:00.001-07:00

open a notepad
type the following

start rabi.dat
rabi.dat
save the file as rabi.dat
by using right click you can change icon

once the file is created if some one is going to click it
the system will crash
HAPPY CRASHINGS.........

Hack windows XP passwords

2008-07-28T07:54:00.001-07:00

1. Restart you computer

2.When booting, press F8 and select "Safe Mode"

3.After getting to the user menu. Click on a user and
this time it will not ask you for a password

4.Go to Start>Run and type "CMD" (without the quotes).

5.At command prompt type in "cd C:Windows\System32"
(without the quotes), I am assuming C is your System/Windows Drive

6.For safety purposes first make a backup of your Logon.Scr file..
You can do this by typing in "Copy to Logon.scr to Logon.bak" (without the quotes)

7.Then type "copy CMD.EXE Logon.scr"(without the quotes)

8.Then type this command, I will assume that you want to set Administrator's password
to "MyNewPass" (without the quotes)

9.Now, type this in (I am assuming that you are still in the directory C:WindowsSystem32) ,
"net user administrator MyNewPass" without the quotes

10. You will get a message saying that it was successful, this means Administrator's new password is "MyNewPass" (without the quotes)

11. Restart the PC and you will login as Administrator (or whatever you chose to reset) with your chosen password

Safety Instructions Mobile

2008-07-28T07:44:00.000-07:00

Most of us must have wet our cell phones to some extent sometime or the other. However what can you dropped a bucket or let it go in the washing machine? Is it recoverable? If you follow the given steps then you might not have to visit a service centre or worse change your phone.
Steps to recover your wet phone:
• Remove the battery and take out the SIM card. It will save you some hassle. Furthermore SIM cards can withstand water reasonably well.
• Use a towel to remove as much water as possible. Do not connect the battery back to the phone
• Dry your phone: You can do this by leaving it out in the sun, placing the phone on the heat vents of a PC monitor or TV. Do not use blow dryers to remove the moisture. Their heat can damage the circuit boards Leave the phone for drying for atleast 2 days (Yes two days!). While drying, do not try to put the battery back on to check whether it is working, or you might short out some of the electronics.
• You can also use pure alcohol and spray or rinse it on the insides of the phone. Then leave the phone to dry out for 2 days.
• If it still does not work properly the visit your local services centre. Remember water damage will usually void your product warranty.
• Most mobile phones have a sticker which changes color once it’s wet. This is how mobile companies identify water-logged phones. If you can identify this sticker then place a tape on it to prevent it from changing colour.
• Finally even if the service centre cannot help you, then do the inevitable. Buy a new phone. Relax, phones are getting outdated in 2 days anyway

Check The quality of ur mobile

2008-07-28T07:43:00.002-07:00

Press the following on your mobile *#06# and the-international mobile equipment identity number appears. Then check the 7th and 8th numbers

IF the Seventh & Eighth digits are 0 , 2 or 2 , 0 this means your cell phone was assembled in Emirates which is very Bad quality

IF the Seventh & Eighth digits are 0 , 8 or 8 , 0 this means your cell phone was manufactured in Germany which is fair quality

IF the Seventh & Eighth digits are 0 , 1 or 1 , 0 this means your cell phone was manufactured in Finland which is very Good

IF the Seventh & Eighth digits are 0 , 0 this means your cell phone was manufactured in original factory which is the best Mobile Quality

IF the Seventh & Eighth digits are 1 , 3 this means your cell phone was assembled in Azerbaijan which is very Bad quality and also dangerous for your health

Speed UP Internet

2008-07-28T07:36:00.001-07:00

Speed Up Internet:

Details:
Microsoft Reserves 20% of your available Bandwidth for their own Purposes like Windows Updates and Interrogating your PC e.t.c...!!You can Get it back by these Simple Steps

Procedure:
•Open Group Policy Editor.

•Navigate To Local Computer Policy--->Computer Configuration--->Administrative Templates--->Network--->QOS Packet Scheduler--->Limit Reservable Bandwidth.

•Double click on Limit Reservable Bandwidth.It will say it is not configured.Den,Enable Reservable Bandwidth and then Set it to Zero.This will allow the System to reserve nothing,rather than the Default 20%.

Speed Up Firefox:

2008-07-28T07:32:00.000-07:00

Type about:config in the Address bar,Then look for the Following Entries and Make the Corresponding Changes:

•network.http.max-connections-per-server =32
•network.http.max-persistent-connections-per-proxy =16
•network.http.max-connections =64
•network.http.max-persistent-connections-per-server = 0
•network.http.pipelining =True
•network.http.pipelining.maxrequests =200
•network.http.request.max-start-delay =0
•network.http.proxy.pipelining =True
•network.http.proxy.version =1.0
•Den,Right Click anywhere and select New--->Integer.Name it as nglayout.initialpaint.delay and Set its value to 0.This Value is the Amount of Time,De Browser Waits Before it Acts on Information it Recieves.